From uneven background to finished wall
Fixings chosen to suit
We select the boarding method around the substrate, space and alignment.
Joints properly treated
We use scrim and careful preparation to support a continuous finish.
One complete sequence
We can take the job from bare background through boarding to final skim.
Create a sound base on difficult walls
Uneven masonry, damaged internal surfaces and renovation work do not always provide a suitable base for a finishing coat. Dry lining uses plasterboard to form a straighter wall or ceiling before joint treatment or skim coating. We can fix boards using methods suited to the background, including dot-and-dab installation where appropriate. New partitions and lined areas can also be incorporated into a wider room project. The fixing method depends on the substrate, available space and the alignment required. We assess those points before deciding how the boards should be installed.
Take the boards through to a smooth finish
Plasterboard is only the start of a complete surface. Once fixed, the board joints and vulnerable areas need treatment so they do not show through the finished plaster. We apply scrim where required, reinforce the relevant joints and prepare the boards for skimming. By handling dry lining as part of the wider plastering job, we can keep the alignment, corners and finished levels consistent. This is particularly useful where one section needs new board while adjoining walls remain in place. The result is a joined-up decorative base rather than a visible patchwork of backgrounds.
Frequently asked questions
What is dry lining used for?
Dry lining creates a suitable internal surface using plasterboard. It can help with uneven masonry, damaged walls, renovation areas, ceilings and new partitions before joint treatment or skim plastering.
What does dot-and-dab dry lining mean?
Dot-and-dab uses suitable adhesive to fix plasterboard to a masonry background. We only choose it where the substrate and job specification make it appropriate, after checking alignment and available space.
Can dry lining be skimmed afterwards?
Yes. We can treat the board joints, apply scrim where required and skim the surface to produce a smooth base for decoration. This allows boarding and plastering to form one coordinated job.